RD8000

Discontinued Products

The cutting-edge RD8000 Cable Locator range offers locate professionals advanced connectivity options and multiple locate functions.

The multifunctional RD8000 range represents Radiodetection’s most advanced pipe, cable and RF marker locators, offering a wide choice of locate functions and advanced connectivity options. The RD8000 improves on speed, accuracy and reliability yet remains a cost-effective solution delivering unique user features. Powered by a digital architecture , RD8000 delivers a highly controllable and reliable locate solution to service any industry, anywhere in the world.

Network Rail Usage
The RD8000 cable and pipe locator products and their accessories are approved for use on the UK's national rail infrastructure, managed by Network Rail.


 

Ergonomics

Light weight – at only 4.2Ibs, 1.9 kg or 5lbs/2.3Kg, for marker models, the RD8000 range is comfortable to use for extended periods.
IP54 protection rating – can operate in almost any environment
Transmitter and locator feature a large, high contrast backlit LCD screen
 

Centros™

Combination of new and innovative algorithms with established software on a high-performance processor core
Improves the accuracy and repeatability of measurements
Delivers powerful signal filtering and analysis allowing continued operation even in the most electrically noisy environments.

iLOC™

iLOC is an advanced Bluetooth link between the RD8000 locator and transmitter
iLOC allows the operator to control the transmitter remotely
Less time walking and more time locating.

SurveyCERT™

 Gives the operator the tools to pass survey information to third-party applications for audit, analysis and reporting
 1000 locate records can be stored and reviewed
 Upload this information to PDA or PC using RD8000 Bluetooth connection.
 

TruDepth™

Depth readings are only indicated when the locator is correctly oriented above the target pipe, cable or sonde or in close proximity to
a marker. Unique automatic marker depth estimation provides measurements without requiring a manual two-step 'lift up' process,
delivering faster and more accurate surveys.

Compass

Visually indicates orientation of the target cables.
Allows the operator to quickly and easily follow the target line.
Maximizes depth measurement accuracy by ensuring the locator is correctly with the target line.
 

Proportional Left - Right Arrow

Visually indicates orientation of the target cable.
Guides the user to the central axis of the pipe or cable with dynamic left/right arrows, enhanced with differentiating sound.
Distance from target cable indicated by length of arrow.

Dynamic Overload Protection

Extends the RD8000's locate capability into areas where other products fail.
Automatically filters out large and unwanted signals while ensuring accurate location of the target pipe or cable.
Particularly useful in electrically noisy environments surch as power sub stations or near overhead high-voltage cables.
 

Bluetooth Connectivity and GPS

Bluetooth connectivity as standard. This allows the locators to interface to external devices for easy transfer of survey data directly into maps and databases.
Optional integrated GPS option for RD8000 models, which enables association of survey data with positional data without the need to carry external equipment. The RD Manager PC software allows easy transfer of the locator's survey data directly into common file formats such as KML for Google Earth.
 

Data logging and CALSafe™

Optional integral logging systems for marker models. It records up to 1 year's typical usage of significant locate parameters every second (including positional data for RD8000 GPS models) and helps identifying training and development needs, and proides independent historical records of the instrument's use. Backed-up data on a PC gives virtually unlimited record keeping for the life of the product.
All marker locator units that feature data logging or GPS provide a convenient 30-day service countdown reminder. CALSafe, a user selectable tool, can be enabled to enforce a recall for service and calibration by disabling the unit after this date.
 

Transmitters

Three models cable of delivering up to 10W of true output power, maintaining constant current across their entire bandwidth in direct
connect, clamp or inductive modes to enable fast and repeatable surveys.
Tx-5 models feature 8kHZ Fault Find functionality; Tx-10 models feature both 8kHZ Fault Find and Current Direction functions.
Tx-5 and Tx-10B models support iLOC functionality which enables remote control features simplying operation and reducing
surveyting time.
Tx-10B fully supports the extended range of the RD8000 PTLM locator to targe telecom and power industries.
90V output capability: All transmitters offer both 30V output options, resulting in higher signal current delivered on high impedance
target lines than typical transmitters that only offer a 50V output. Higher signals are more locatable signals that travel a longer
distance.
SideStepauto: allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this
information to optimize the active frequency. Sidestepauto helps to improve locate accuracy and extends battery life.
ECO mode: extends alkaline battery life by warning the operator and gradually reducing the power output in low battery condition
( Tx-5 and Tx-10 models only).
 

Supporting Software

The RD8000 range of locators and transmitters are supported by two application suites for Microsoft Windows : Centros Manager for standard cable and pipe locators and RD Manager for marker locators.
Remote online calibration validation through eCAL (for standard locators) or eCERT (for marker locators)
Remotely update product software as upgrades are released by Radiodetection.
RD Manager only functionalities:
Retrieve and manage stored survey data and internal loggings
Extended warranty registration
View more information on Centros Manager.
View more information on RD Manager.

3 Years extended warranty

The standard 1 year warranty can be extended to a total of 3 years by registering the equipment. Registration is free and provides access to software upgrades and other online features.

Rechargeable battery packs for Locators and Transmitters.

Available for Precision Cable and Pipe Locators and the Tx Transmitter range. Standard for all Marker Locator Models.
Offer increased flexibility.
Provide improved cost-of-ownership.
Deliver excellent run-time and superior cold-weather performance by comparison to standard alkaline batteries.
No need for operators to replace, manage and recycle alkaline battery cells, reducing the associated costs, workload and environmental burden.
Locator rechargeable battery packs are supplied with a mains charger (90V to 240V,50/60Hz) as standard. An automotive charger (12V to 24V DC) is also available for use on the move.
Transmitter rechargeable packs are available in kits that include the rechargeable battery pack, a mains charger (90V to 240V, 50/60Hz) and an automotive charger (12V to 24V DC).
Individual chargers and battery packs are also available as separate parts for both locators and transmitters.

Remote Calibration

Using the Windows compatible supporting software, locators can be checked for correct calibration and operation over the internet using eCERT ( for marker models) or eCAL ( for non-marker models ) calibration validation service, without needing to return the RD8000 to a service center. Operations can then print, email or save a calibration certificate, or book a service should any issues be detected.
eCAL can issue and print validation certificate without needing to return the RD8000 to a service center.
More information on eCAL™.